Keyless Drill Chuck, Key Type Drill Chuck with Threaded Fitting, Keyless Drill Chuck with Threaded Mounted
The drill chuck is one of the main parts of electric tool industry and machine tool industry, widely used in electric drill, drilling machine. Chuck is connected with the tool, is used to clamp the handle type tool accessories. The drill and connection with threaded connections and taper connection in two ways. Threaded connection is mainly used on an electric hand drill, cone connection is mainly used for drilling machine drill chuck from structure can be classified as type wrench and keyless. Spanner drill chuck wrench to tighten the wheel needs, mainly used in machine tool industry, such as drill and drill. Hand drill chuck set to hold on and tighten the collet, mainly used for electric drill. Spanner drill chuck as by pulling wheel to tighten the collet and a pulling wheel is a with an extension arm of bevel gear, so in the process of screwing can serve to increase the role of input torque, so chuck clip clamping force is too large.
Drill Chuck Drill Chuck,Drill Press Chuck,Keytype Drill Chuck,Lathe Keyless Drill Chuck JINING QINFENG MACHINERY HARDWARE CO.,LTD , https://www.qftoolholder.com
High Weir Spiral Classifier/screw classifier:
High Weir Spiral Classifier entensively suitable for metal ore selection procedure when grading the ore slurry by size, it can also be used to get rid of the mud, dehydrates in washing ore, ofter make up a close circle together with the ball mill.
Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine particles rice, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center which is under screw shaft, and is underneath overflow end.
Features and advantages of concentrating spiral classifier/screw classifier
1).Simple structure, reliable running and easy operation.
2).It mechanically classifies through the mechanism of different sedimentation speed of solid particle in liquid due to different size and different specific gravity.
3).It can classify the ground material powder from the grinder, spiral the coarse grain into material inlet of grinder through the spiral chip, and discharge the classified fine grain from overflow surface.
4).Its base is made from channel steel, and its body is welded from steel plate.
5).The lower support of spiral bearing is of engine-bearing structure of good wear resistance and durability.
6).The lifting device is of electric and manual mode.
Main Technical Parameters of the screw classifier:
Model
Type
Spiral diameter(mm)
Flume length(mm)
Spiral speed(r/min)Capacity(t/d)
Motor power(kw)
Weight(t)
Return sand
Overflow
Drive
Upgrade
High
Weir
Spiral
ClassifierFG7.5
750
5500
6-10
340-570
65
3.0
By Hand
2.7
FG10
1000
6500
5.0-8.0
675-1080
110
5.5
By Hand
4.43
FG12
1200
6500
5.0-8.0
1170-1870
155
5.5
1.5
8.7
FG15
1500
8400
4.0-6.0
1830-2740
235
7.5
2.2
12.5
FG20
2000
8400
4.0-6.0
3240-5400
400
11
2.8
20.5
FG24
2400
9210
3.6
4650-7450
580
15
3.0
25.6
FG30
3000
1250
3.2
11625
890
22
4.0
37.7
2FG12
1200
6500
5.0-8.0
2340-3740
310
5.5×2
1.5×2
14.0
2FG15
1500
8400
4-6.0
3660-5480
470
7.5×2
1.5×2
21.1
2FG20
2000
8400
3.0-5.5
7780-11880
800
11×2
2.8×2
36.5
2FG24
2400
9210
3.6
13600
1160
15×2
3×2
46.8
2FG30
3000
12500
2.0-3.2
14600-23400
1785
22×2
4×2
73.0
Submerged
Spiral
ClassifierFC12
1200
8400
5-8
1170-1870
120
7.5
2.2
10.4
FC15
1500
10500
4.0-6.0
1830-2740
185
7.5
2.2
16.8
FC20
2000
12900
2.0-5.5
3895-5940
320
15
2.8
29.1
FC24
2400
14200
2.5-4.0
4650-7450
455
18.5
4
41.0
FC30
3000
14300
3.2
11625
705
30
4
56.8
2FC15
1500
10500
4.0-6.0
2280-5480
370
7.5×2
1.5×2
30.7
2FC20
2000
12900
3.0-5.5
6480-11800
640
11×2
3×2
50.0
2FC24
2400
14200
3.67
9300-14900
910
18.5×2
4×2
67.9
2FC30
3000
14300
3.2
23300
1400
30×2
4×2
85.3
High Weir Spiral Classifier/screw classifier:
High Weir Spiral Classifier entensively suitable for metal ore selection procedure when grading the ore slurry by size, it can also be used to get rid of the mud, dehydrates in washing ore, ofter make up a close circle together with the ball mill.
Working Principle
The grinded pulp is fed into tank from the inlet in the middle of settlement region, and the slurry classification sedimentation area is under the inclined tank. The spiral with low speed rotation stirs the slurry, so that the fine particles rice, and the coarse particles sinks to the bottom of tank. Overflow weir is above the bearing center which is under screw shaft, and is underneath overflow end.
Features and advantages of concentrating spiral classifier/screw classifier
1).Simple structure, reliable running and easy operation.
2).It mechanically classifies through the mechanism of different sedimentation speed of solid particle in liquid due to different size and different specific gravity.
3).It can classify the ground material powder from the grinder, spiral the coarse grain into material inlet of grinder through the spiral chip, and discharge the classified fine grain from overflow surface.
4).Its base is made from channel steel, and its body is welded from steel plate.
5).The lower support of spiral bearing is of engine-bearing structure of good wear resistance and durability.
6).The lifting device is of electric and manual mode.
Main Technical Parameters of the screw classifier:
Model
Type
Spiral diameter(mm)
Flume length(mm)
Spiral speed(r/min)Capacity(t/d)
Motor power(kw)
Weight(t)
Return sand
Overflow
Drive
Upgrade
High
Weir
Spiral
ClassifierFG7.5
750
5500
6-10
340-570
65
3.0
By Hand
2.7
FG10
1000
6500
5.0-8.0
675-1080
110
5.5
By Hand
4.43
FG12
1200
6500
5.0-8.0
1170-1870
155
5.5
1.5
8.7
FG15
1500
8400
4.0-6.0
1830-2740
235
7.5
2.2
12.5
FG20
2000
8400
4.0-6.0
3240-5400
400
11
2.8
20.5
FG24
2400
9210
3.6
4650-7450
580
15
3.0
25.6
FG30
3000
1250
3.2
11625
890
22
4.0
37.7
2FG12
1200
6500
5.0-8.0
2340-3740
310
5.5×2
1.5×2
14.0
2FG15
1500
8400
4-6.0
3660-5480
470
7.5×2
1.5×2
21.1
2FG20
2000
8400
3.0-5.5
7780-11880
800
11×2
2.8×2
36.5
2FG24
2400
9210
3.6
13600
1160
15×2
3×2
46.8
2FG30
3000
12500
2.0-3.2
14600-23400
1785
22×2
4×2
73.0
Submerged
Spiral
ClassifierFC12
1200
8400
5-8
1170-1870
120
7.5
2.2
10.4
FC15
1500
10500
4.0-6.0
1830-2740
185
7.5
2.2
16.8
FC20
2000
12900
2.0-5.5
3895-5940
320
15
2.8
29.1
FC24
2400
14200
2.5-4.0
4650-7450
455
18.5
4
41.0
FC30
3000
14300
3.2
11625
705
30
4
56.8
2FC15
1500
10500
4.0-6.0
2280-5480
370
7.5×2
1.5×2
30.7
2FC20
2000
12900
3.0-5.5
6480-11800
640
11×2
3×2
50.0
2FC24
2400
14200
3.67
9300-14900
910
18.5×2
4×2
67.9
2FC30
3000
14300
3.2
23300
1400
30×2
4×2
85.3
Drill chuck is by drilling collet, elastic dial ring, connecting piece, the back cover. In drill collet, its axial positioning is implemented using the connection piece, upon jack, via the circumference of a circle in the elastic dial ring under the action of internal thread axial movement, under the action of a precise automatic centering and clamping tool, when you are working with different drilling tools need to adopt such as center drill, drill, reamer, tap drill chuck, can loosen the positioning screw, turn the segment to the desired location, fastening positioning screw, realize the drill chuck the movement of the transfer.
Gold Ore Mining Plant Screw Classifier
Model NO.: FG15, FG10, FG2.4
Energy Saving: Energy Saving
Warranty: 1 Year
Condition: New
Brand: Hengxing
Price: Factory Price
Drawing: Offer
Spare Parts: Supply for Whole Using Time
Installation: Engineer Oversea Service
After Sale Service: Supply for Whole Using Life
Trademark: HengXing
Specification: ISO, CE
Origin: China
Model NO.: FG15, FG10, FG2.4
Energy Saving: Energy Saving
Warranty: 1 Year
Condition: New
Brand: Hengxing
Price: Factory Price
Drawing: Offer
Spare Parts: Supply for Whole Using Time
Installation: Engineer Oversea Service
After Sale Service: Supply for Whole Using Life
Trademark: HengXing
Specification: ISO, CE
Origin: China
Gold Ore Mining Plant Screw Classifier Contact:
Ms Sara Pang
Mobile phone :Â Â 0086137 8347 1727
Â
Â
Gold Ore Mining Plant Screw Classifier Contact:
Ms Sara Pang
Mobile phone :Â Â 0086137 8347 1727
Â
Â