Capsule Filling Machine,Semi Automatic Capsule Filling Machine,Liquid Capsule Filling Machine,Automatic Capsule Filling Machine Ruian Science Machinery And Technology Co., Ltd. , https://www.science-packs.com
The filling machine model NJP Series is fully automatic capsule filling and closing machine, suitable for dosing powder/granules/pellet in hard gelatin capsules.
It adopts intermittent motion and multi-position tamped dosing method to complete capsule orientation, separation, filling, closing and ejection etc. With different size parts the machine is suitable for size 00 to size 5 of empty capsules.
The production speed can be controlled by means of a frequency converter.
The machine is designed in accordance with GMP standard. All parts in contact with product are made of stainless steel or GMP approval material. Advantage of the machine is advanced designing, novel structure, precise dosing, safe and reliable, high filling rate etc.
2. Filling structure is handled by modularity, as well as precious design, reliability and low wear rate.
3. The material of all parts contacted with products is stainless steel or GMP approval material, whole close structure ensure products avoiding pollution, accord with GMP completely.
4. Can fill No.00-No.5 gelatin capsule, capsule acceptability is more than 99%.
5. Velocity Modulation and PLC control system ensure the operation process safety and convenience
6. New model structure, ten-work position, whole close and intermittent turret, upper and lower segment's single-direction movement is very safe;
7. The new model structure whole close dosage device, pressing powder into the slug through five times tamping, ensure the dosage precision. Electric Control System adopts PLC and velocity modulation Electric parts are from world top brands, such as PHOENIX, OMRON and so on, operating nicety, safety and reliable.
Reasonable determination of the relationship between open pit mining and safety
Since the mining is from the top to the bottom, the upper steps are firstly mined to the realm, and some of the fixed slopes are formed, and it is required to remain stable for a long time without a large number of landslides. In operation, the smaller the final slope angle, the safer it is. However, if the slope angle is too small, a large amount of rock-peeling will be increased during the mining process, resulting in deterioration of the economic benefits of the mine. If the final slope angle is increased, it will exceed the angle of safety and stability, which will cause slope landslide and endanger the safety of the stop workers. A large open pit mine in the country has hundreds of thousands of m 3 landslide accident occurred, causing great economic losses to the mines, and therefore can not blindly increase the final slope angle, to prevent accidents. The final slope angle of some mines in China varies from 35° to 65°.
Features:
1. New Indexer gear box structure.