Gas chromatography is widely used in petrochemical, biochemical, medical and health, food industry, environmental protection, etc. In addition to quantitative and qualitative analysis, it can also determine the partition coefficient, activity coefficient and molecular weight of the sample on the stationary phase. And physicochemical constants such as specific surface area. The following is a small method for detecting faults in the gas chromatograph by Shanghai Tate Instruments. Gas chromatographs have different faults, large or small, and there are more than one way to detect faults: 1. Observation method This method mainly finds faults through visual observation, which we collectively refer to as observation methods. The observation method is mainly used to check the deterioration of the gas chromatograph parts, the board leakage welding, the virtual welding, the short-circuit burning between the wires, the wire breakage and the component welding errors. 2, dynamic observation method A method of finding faults and troubleshooting by observing associated waveforms is called dynamic observation. 3, static measurement method This is mainly to determine the fault by measuring the DC operating voltage and current in the line through a multimeter. This is a common method of troubleshooting, which is especially important for testing linear circuits. 4, the division method In the process of finding faults, the method of stepping down the fault by gradually unplugging part of the board or disconnecting on the board, and finally isolating the fault point is called the split method. 5, tracking method In the process of finding faults, a clue is found, and the method of tracking down the clues is called tracking method. 6, touch method Through the touch method (ie, the finger or other parts of the person to touch the components), to find out whether the gas chromatograph components are overheated or should be hot and not hot (such as power transformers and tubes should have heat), The method of indirectly determining the fault location is called the touch method. 7, replacement method The method of determining the fault in a certain range by replacing the electric wires, boards, tubes or other components is called the replacement method. 8, simulation method In the process of searching for faults, the method of determining the fault by comparing the obtained data with the same point of the faultless instrument and the faulty instrument is called a simulation method. 9, heuristics In the process of searching for faults, if measured and analyzed, several reasons can cause such faults. At this time, you can first try to use a method to troubleshoot, such as invalid, and then use another method to test To troubleshoot, this is called heuristics. 10, local heating method The instrument malfunctions due to an increase in temperature and is usually excluded by local heating. For example, an instrument that does not work properly at a temperature of 40 ° C, and can work normally after the temperature is lowered. At this point, the instrument can be restored to normal temperature, and it is locally heated by an electric hair dryer or an electric soldering iron to find the fault. This is called local heating. Topkit tower cranes are commonly used in construction projects, particularly in high-rise building construction. They are known for their versatility, reliability, and ease of use. The counterweight system can be adjusted to accommodate different lifting requirements, making them suitable for a wide range of applications. 5T Tower Crane,Topkit Tower Cranes,Tower Cranes,5T Hammer head Tower Crane,Hammer head Type Tower Crane SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com
Some advantages of topkit tower cranes include:
1. High lifting capacities: The top-mounted counterweight system allows for increased lifting capacities, making them suitable for heavy lifting operations.
2. Increased hook height: The counterweight system also enables higher hook heights, allowing for efficient construction of tall structures.
3. Easy assembly and disassembly: Topkit tower cranes are designed for easy assembly and disassembly, making them convenient for construction sites with limited space or frequent crane relocation.
4. Versatility: These cranes can be equipped with various types of jibs and attachments to meet different project requirements, such as luffing jibs for working in confined spaces or jibs with multiple trolley systems for increased productivity.
5. Cost-effective: Topkit tower cranes are generally more cost-effective compared to other types of tower cranes, making them a popular choice for many construction companies.
Overall, topkit tower cranes are widely used in the construction industry due to their high lifting capacities, versatility, and ease of use. They play a crucial role in the efficient and safe execution of construction projects.