Wuhan invests 15 billion yuan in 2012 to build a new energy auto parts park

<

On February 28, 2012, the Haixi Auto Parts Industrial Park, with a total investment of 15 billion yuan, was started in the Wujiashan Development Zone in Dongxihu.

The project plans to use 2.6 square kilometers of land, with a total investment of 15 billion yuan. Relying on Changchun FAW, Zhengzhou Haima, Anhui Jianghuai and other units, it will build a new energy auto parts production base consisting of automatic transmission and motor system integration, battery control integration technology, transmission, and special engine technology.

There are six companies in the day park with the first phase of construction, a total investment of 1.8 billion yuan, respectively, Wuhan Weigu auto parts, Wuhan Aozheng technology, Wuhan Quangong auto electronic technology, Wuhan Zhongjun auto parts, Wuhan Tuoli Transportation Technology, Weigu Wuhan Science and Technology Development Company and other bases.

Anti-wear Ring

Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.

Wear ring for excavator,For excavator track,For excavator accessories

Safe Seal Technology Co., Ltd. , https://www.aprseal.com