Recently, Beijing Hyundai Motor Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recall, and decided to recall the following parts of the car from July 31, 2017, for a total of 43,764 vehicles. Cattle Fence Panels,Farm Fence Panels,Hog Panel Fencing,Bull Panel Fence Anping Xinghong Metal Wire Mesh Co.,Ltd , https://www.apironwire.com
(1) A total of 29,937 new Shengda vehicles equipped with a 2.4L THETA GDI engine imported from South Korea from November 29, 2012 to May 31, 2013;
(II) A total of 13,827 new Shengda cars equipped with Korean 2.0T THETA GDI engines produced between November 29, 2012 and November 30, 2013.
In the vehicle within the scope of this recall, due to poor burr removal of the crankshaft cross oil hole processing, the generated metal debris hinders the flow of oil to the main bearing, resulting in insufficient lubrication of the bearing and accelerated aging of the bearing. The internal cylinder is internally knocked, the engine fault light and the oil alarm light are on. After a long time of use, the axle may be caught. The vehicle loses power and there is a safety hazard. Beijing Hyundai Motor Co., Ltd. will use the engine-specific noise meter to detect the engine of the vehicle within the recall range, and freely replace the engine oil for the vehicle without problems according to the test result, and replace the engine long cylinder free of charge for the problematic vehicle to eliminate Security risks.
Beijing Hyundai Motor Co., Ltd. will notify the relevant owner through registered dealers by registered mail or telephone. Users can call the customer service hotline 400-800-1100 for consultation on their mobile phones or landlines. Owners can also visit the AQSIQ Defective Product Management Center website ( ) and the WeChat public account (AQSIQDPAC) for more information. In addition, you can also call the AQSIQ Defective Product Management Center hotline to reflect problems during the implementation of the recall or submit defects.