Small Kitchen Hand Stick Blender Mixer Best Hand Blender,Commercial Immersion Blender,Kitchen Stick Blender,Small Kitchen Blender,Salad Blender,best stick blender NINGBO CHENGTUO ELECTRIC APPLIANCE CO.,LTD , https://www.chengtuoappliance.com
What are the ways to increase the efficiency of open-end quantitative packaging machines?
What are the ways to increase the efficiency of open-end quantitative packaging machines?
The automatic particle packing machine automatically completes all work such as metering, bag making, filling, sealing, printing batch numbers, cutting off, and counting; it automatically completes the packaging of fine-grained materials.
Granule automatic packaging machine is mainly used for packaging the following products or similar products: granular pharmaceuticals, sugar, coffee, fruit Jane, tea, monosodium glutamate, salt, seeds and other fine particles.
Technical Features Edit
1. Key switch + full digital display. The operation is stable and reliable.
2. Computer control, stepping motor driven pull bag, high precision bag making.
3. Fully track the color mark, intelligently exclude false color marks, automatically complete the positioning of the bag and set the length.
4. Heat sealed dual temperature control, intelligent temperature control.
5. Different filling mechanisms can be configured to achieve the packaging of powders, granules, liquids, sauces and other materials.
6. Lapel-style bag making mechanism, bag-making flat appearance; bag-shaped back sealing pillow-type bag, a wide range of adaptation.
Technical parameter editing
Bag length range: 100 to 220 mm Bag width range: 100 to 140 mm
Packing speed: 18-55 bags/min (depending on the material and specifications)
Measuring range: 100 to 500 ml
Compatible packaging materials: Polypropylene/polyethylene, polyester/aluminum foil/polyethylene, polyester/aluminum/polyethylene, nylon/polyethylene, etc.
Bag way: pillow type seal
Power: 3.3 Kw / AC 380 V
Measurement method: cup type
Dimensions: length 1320mm × width 890mm × height 2200mm
Weight: 540 Kg
Optional device:
Thermal coder, exhaust device, hoist
Safe Operating Regulations
(1) Check whether the specifications of the fitted cup and bag maker are consistent with the requirements before opening the automatic pelletizing machine.
(2) Turn the main motor belt by hand to see if the machine is running flexibly. After confirming that the machine has no abnormal conditions, it can be powered on.
(3) Under the machine, the packaging material is installed between the two paper stoppers and placed in the slot of the paper arm plate of the machine. The paper stopper should clamp the core of the loaded material so that the packaging material and the bag making device positive,
Then tighten the knob on the bumper and ensure that the printed surface is facing forward or the composite surface (ie polyethylene surface) faces backwards. After starting the machine, adjust the axial position of the packaging material on the paper feed roller according to the paper feeding condition to ensure that the paper supply is normal.
(4) Switch on the total power switch of the pellet automatic packaging machine, depress the clutch handle, separate the metering mechanism from the main drive, switch on the start switch, and the machine runs empty.
(5) If the conveyor belt rotates clockwise, stop immediately. At this time, the main motor is reversed, and the belt is reversed counterclockwise after the motor is inverted.
(6) Set the temperature, according to the packaging materials used, set the heat sealing temperature on the temperature controller of the electric control box.
(7) Adjusting the bag length Insert the packaging material into the bag making machine according to the relevant regulations, sandwich it between the two rollers, turn the roller, pull the packaging material below the knife, and wait until the set temperature reaches 2 minutes.
Turn on the start switch, loosen the lock nut of the bag length adjustment screw, adjust the knob of the bag length controller, turn it clockwise to shorten the bag length, otherwise lengthen it, reach the required bag length, and tighten the nut.
(8) Determine the position of the cutter. When the length of the bag is determined, remove the cutter and turn on the start switch. After a few bags have been sealed, when the heat sealer has just opened, the roller will stop immediately before the roller has been pulled.
Then move the cutter on the left to align the knife edge with the length of the cross-barrier bag with a multiple of the bag length (usually 2 to 3 times the length of the bag), and make the blade perpendicular to the direction of the straight paper, and tighten the fastening screw of the left knife.
Place the knife on the right side against the knife on the left side. Put the knife edge on the cutting edge after laying it flat. Tighten the fastening screws on the front of the stone cutting knife slightly. Press the back of the cutting knife to make the pressure between the two cutting blades certain. , Fasten the fastening screws behind the right knife,
Put the packing material between the blades and knock the front of the right knife slightly to see if it can cut the packaging material. Otherwise, it should not be cut until it can be cut. Finally tighten the front screw.
(9) When the machine is shut down, the heat sealer must be in an open position to prevent burning of the packaging material and to extend the lifetime of the heat sealer.
(10) When rotating the metering disc, it is not allowed to rotate the metering disc clockwise. Before starting the machine, it is necessary to check if all the feeding doors are closed (except the material door in the open state), otherwise parts may be damaged.
(11) Measurement Adjustment When the weighing weight of the packaging material is less than the required weight, the amount of packaging required can be adjusted by adjusting the screw ring of the metering dial clockwise. If the weight is greater than the required weight, the opposite is true.
(12) After the charging operation has no abnormality, the machine can work normally. Turn on the counter switch to complete the counting work. Finally, install the protective cover.