Xbc Direct Start Engine Water Pump Diesel for Fire Fighting

<

Model NO.: XBC
Voltage: 12V/24V
Type: Diesel
Pressure: Low Pressure
Insulation Class: F
Protection Class: IP55
Standard: New GB Fire Fighting
Application: Fire Fighting
Name: Diesel Fire Fighting Pump
Certification: Ce
Brand: Changsong
Trademark: KAIYUAN
Transport Package: Wooden Case Packing
Specification: Pump coupled with motor
Origin: Shanghai, China
HS Code: 8413709990
Model NO.: XBC
Voltage: 12V/24V
Type: Diesel
Pressure: Low Pressure
Insulation Class: F
Protection Class: IP55
Standard: New GB Fire Fighting
Application: Fire Fighting
Name: Diesel Fire Fighting Pump
Certification: Ce
Brand: Changsong
Trademark: KAIYUAN
Transport Package: Wooden Case Packing
Specification: Pump coupled with motor
Origin: Shanghai, China
HS Code: 8413709990
>>> Product description                                                    
We use CHANGSONG(the top two brand in China, deeply obsessed by customers) diesel engine for its perfect performance and its suitable price. We always equip the four batteries, one fuel filter, one air filter, one lube oil filter, one coolant filter two belts for our customers. The color of the diesel engine will be according customers preference.  

As a fire-fighting latest equipment, XBC diesel engine fire-fighting pump group series are developed successfully, strictly complying with national standard GB6245-2006, The Performance Requirement and Testing Method of Fire Fighting Pumps and with NFPA20, Installation of Centrifugal Fire-fighting Pumps.
Classified by coupled pump head types (single stage single suction type, single stage double suction type, multi-section multistage type), this equipment can fall into three sub-categories: XBC-IS, XBC-S and XBC-D. The equipment is widely used in many occasions.
 
This equipment can use high quality diesel engines from domestic market or foreign countries, so it is the fire protection equipment with advantages as follows, stable start, high capacity, compact structure, easy maintenance, high automation and advanced and dependable performance.

>>> Product Features
X6135, 12v135, 4102, 4105, 61 02, 4100, 495 etc diesel engine series provide power for our pumps. Our fire-fighting pumps are flexible coupled with these diesel engines (clutches are available). Besides, diesel tank, radiation water tank, blower, control panel (for the automatic unit) etc can be provided as components.
 
Being the auto-control unit, a separate diesel engine auto-control panel (programmable) carries out the system's automatic start, run, auto-switch (the electric motor pump unit is switched to the diesel engine pump or the diesel engine pump unit to another diesel pump unit), auto-protection (warning and stop protection for the diesel engine's over-speed, lower oil pressure, high water temperature, three-time start failures, low voltage of accumulator warning etc.) and also can be connected to user's fire-fighting center or the fire auto-warning device with the purpose of remote monitoring.
 
In order to keep the unit working normally below 5ºC, it can be fitted with an AC 220v water cooling system.
 
The diesel engine fire-fighting pump group can be formed with electric motor pumps and jockey pumps as an automatic fire-fighting water supply system (see tabel1). For more details, please see our document "Diesel Engine Control System". The system also can be connected to the fire-fighting center.
 
There are two ways of inletting the water: manual water adding and water self-priming. the former is preferred in accordance with fire-fighting protection standard. Automatic vacuum water self-priming devices can be provided only when customers request. In this case, the dimension of the diesel engine pump unit is changed.

>>> Product Components
No. Name QTY(set)
1 Oil Filter 1
2 Fuel Filter 1
3 Air Filter 1
4 Display Meters 4
5 Flexible Shaft Joint 1
6 Common Base with Fuel Tank 1
7 Battery DC 12V*1
8 Cooling Fan 1

>>> Cooling Mode of Generator
The cooling system of the oil engine supplied by this CO., is generally in a closed cycle and functions cooling in such a way as both generator's surface and radiating water take heat exchange with the airflow produced by its blower. please make a note at order if requiring an opened cycle of cooling(i.e. cooling of the generator is carried out by way of a heat exchanger between the cooling water transported through a water pump and the cycling water inside of the diesel engine).

>>>Model Meaning
XBC8/50-IS
XBC: diesel engine fire fighting pump group
8: 10 times rated pressure of pump(bar)
50: rated flow(L/S)of pump group
IS: fire fighting pump type(IS. S. D as single stage single suction type, single stage double suction type, sectional multi-stage type separately)

>>> Product Application
This kind of pump can be suitable for the fire fighting wate supply in storehouse, yard, airport, petroleum, and chemical industry, power plant, liquefied gas, textile, ship, oil ship etc. 

>>> Product Image
Xbc Direct Start Engine Water Pump Diesel for Fire Fighting

>>> Company Information&Advantages
Shanghai Kaiyuan provides booster pumps, submersible pumps, sewage pumps, fire fighting pumps, multistage vertical (horizontal) water pumps, diesel engine water pumps, water supply equipment and other pumps. Here we have modern production base of 60000 square meters, and 3000 square meters of office, professional R&D institution and technology team, which makes us a world-class company. At present, we have two factories, one is in Fengxian District, Shanghai City; the other is in Nantong City, Jiangsu Province. So welcome to visit our factory.
Xbc Direct Start Engine Water Pump Diesel for Fire Fighting

 1. Punctual delivery time:

  • We put your order into our tight production schedule, keep our client informed about production process, ensure your punctual delivery time.
  • Shipping notice/ insurance to you as soon as your order is shipped.

2. After sales service:

  • After receiving the goods, We accept ur feedback at first time.
  • We could provide installation guide, if you have need, we could give you global service.
  • Our Sales are 24-hours online for ur request.

3. Professional sales:

  • We value every inquiry sent to us and ensure quick competitive offer.
  • We cooperate with customer to bid tenders, and  provide all necessory document.
  • We are a sales team, with all techinical support from engineer team.

Shanghai Kaiyuan Pump have many global clients, we offer professional service to them.  With the aim of "to establish a close strategic partnership and develop together with customers".  we will work whole heartedly to improve our products and service. We will also pledge to work jointly with businese partners to elevate our cooperation to a higher level and share success together with our customers. We are looking forward to establishing relationship with you and your esteemed company in the near future. 









  >>> Product description                                                    
We use CHANGSONG(the top two brand in China, deeply obsessed by customers) diesel engine for its perfect performance and its suitable price. We always equip the four batteries, one fuel filter, one air filter, one lube oil filter, one coolant filter two belts for our customers. The color of the diesel engine will be according customers preference.  

As a fire-fighting latest equipment, XBC diesel engine fire-fighting pump group series are developed successfully, strictly complying with national standard GB6245-2006, The Performance Requirement and Testing Method of Fire Fighting Pumps and with NFPA20, Installation of Centrifugal Fire-fighting Pumps.
Classified by coupled pump head types (single stage single suction type, single stage double suction type, multi-section multistage type), this equipment can fall into three sub-categories: XBC-IS, XBC-S and XBC-D. The equipment is widely used in many occasions.
 
This equipment can use high quality diesel engines from domestic market or foreign countries, so it is the fire protection equipment with advantages as follows, stable start, high capacity, compact structure, easy maintenance, high automation and advanced and dependable performance.

>>> Product Features
X6135, 12v135, 4102, 4105, 61 02, 4100, 495 etc diesel engine series provide power for our pumps. Our fire-fighting pumps are flexible coupled with these diesel engines (clutches are available). Besides, diesel tank, radiation water tank, blower, control panel (for the automatic unit) etc can be provided as components.
 
Being the auto-control unit, a separate diesel engine auto-control panel (programmable) carries out the system's automatic start, run, auto-switch (the electric motor pump unit is switched to the diesel engine pump or the diesel engine pump unit to another diesel pump unit), auto-protection (warning and stop protection for the diesel engine's over-speed, lower oil pressure, high water temperature, three-time start failures, low voltage of accumulator warning etc.) and also can be connected to user's fire-fighting center or the fire auto-warning device with the purpose of remote monitoring.
 
In order to keep the unit working normally below 5ºC, it can be fitted with an AC 220v water cooling system.
 
The diesel engine fire-fighting pump group can be formed with electric motor pumps and jockey pumps as an automatic fire-fighting water supply system (see tabel1). For more details, please see our document "Diesel Engine Control System". The system also can be connected to the fire-fighting center.
 
There are two ways of inletting the water: manual water adding and water self-priming. the former is preferred in accordance with fire-fighting protection standard. Automatic vacuum water self-priming devices can be provided only when customers request. In this case, the dimension of the diesel engine pump unit is changed.

>>> Product Components
No. Name QTY(set)
1 Oil Filter 1
2 Fuel Filter 1
3 Air Filter 1
4 Display Meters 4
5 Flexible Shaft Joint 1
6 Common Base with Fuel Tank 1
7 Battery DC 12V*1
8 Cooling Fan 1

>>> Cooling Mode of Generator
The cooling system of the oil engine supplied by this CO., is generally in a closed cycle and functions cooling in such a way as both generator's surface and radiating water take heat exchange with the airflow produced by its blower. please make a note at order if requiring an opened cycle of cooling(i.e. cooling of the generator is carried out by way of a heat exchanger between the cooling water transported through a water pump and the cycling water inside of the diesel engine).

>>>Model Meaning
XBC8/50-IS
XBC: diesel engine fire fighting pump group
8: 10 times rated pressure of pump(bar)
50: rated flow(L/S)of pump group
IS: fire fighting pump type(IS. S. D as single stage single suction type, single stage double suction type, sectional multi-stage type separately)

>>> Product Application
This kind of pump can be suitable for the fire fighting wate supply in storehouse, yard, airport, petroleum, and chemical industry, power plant, liquefied gas, textile, ship, oil ship etc. 

>>> Product Image
Xbc Direct Start Engine Water Pump Diesel for Fire Fighting

>>> Company Information&Advantages
Shanghai Kaiyuan provides booster pumps, submersible pumps, sewage pumps, fire fighting pumps, multistage vertical (horizontal) water pumps, diesel engine water pumps, water supply equipment and other pumps. Here we have modern production base of 60000 square meters, and 3000 square meters of office, professional R&D institution and technology team, which makes us a world-class company. At present, we have two factories, one is in Fengxian District, Shanghai City; the other is in Nantong City, Jiangsu Province. So welcome to visit our factory.
Xbc Direct Start Engine Water Pump Diesel for Fire Fighting

 1. Punctual delivery time:

  • We put your order into our tight production schedule, keep our client informed about production process, ensure your punctual delivery time.
  • Shipping notice/ insurance to you as soon as your order is shipped.

2. After sales service:

  • After receiving the goods, We accept ur feedback at first time.
  • We could provide installation guide, if you have need, we could give you global service.
  • Our Sales are 24-hours online for ur request.

3. Professional sales:

  • We value every inquiry sent to us and ensure quick competitive offer.
  • We cooperate with customer to bid tenders, and  provide all necessory document.
  • We are a sales team, with all techinical support from engineer team.

Shanghai Kaiyuan Pump have many global clients, we offer professional service to them.  With the aim of "to establish a close strategic partnership and develop together with customers".  we will work whole heartedly to improve our products and service. We will also pledge to work jointly with businese partners to elevate our cooperation to a higher level and share success together with our customers. We are looking forward to establishing relationship with you and your esteemed company in the near future. 









 

The spud is main part Cutter Suction Dredger, when operation, through steel spud

Cross-cut construction method

1, the cutter suction Dredger is equipped with spud in the general area of construction, steel spud should be symmetrical cross-cut method or a steel cross-car spud digging method of construction.

2, in the area of large waves, equipped with three cable dredger positioning spud should be positioned with three cable cross-cut construction method.

3, the flow velocity in large areas or large waves, equipped with an anchor on the cable cross digging equipment cutter suction dredger, anchor cable should be used cross-cut construction method

Segment dig method

1, Trench length greater than the length of the water pipeline dredge effective extension should be segmented according to the length of the dredgers and the construction of water pipelines can Excavation.

2. Trench turnaround curve is divided into several sections require excavation of straight line segments can be linear piecewise curve approximation safe construction.

3. Trench different specifications or different schedule requirements, should be in accordance with the requirements of the contract segment.

4, navigation or interference by other factors, the construction can be segmented as needed

Shun countercurrent construction

When river construction using steel spud positioned, should adopt the downstream construction; construction should be used when using countercurrent anchor cable cross-dig construction method; when the large flow rates, and can be used under construction downstream end of the anchor to ensure safety.

Photo of our Marine Spud:

Marine Spud


The specifications of our spud

A. General

High accuracy, fully welded, painted construction can be used for cutter suction dredger.

When the cutter suction dredger is working, two spuds insert the sea alternatively, one is main pile, always aligned pocket centerline and the other is vice pile used forward exchange, to meet dredger back and forth and meet dredging work.

B. Construction and procedure

The construction is to be built according to the drawing with rules of good workmanship and to be built the longitudinal frame system.

The construction is of rolled Steel Pipe sections with varying wall thickness, from40mm to 150mm, which are carefully manufactured and checked to ensure roundness, straightness, segment connection deflection within the specific tolerances.

C. Procedure

Pre-roll bending pf plate-Rolling of cylindrical hull-Welding the vertical seam to close the section-Heat treatment-Rolling to correct ovality-Assemble of the several pipe sections-Assemble with accessories( Sheave , expansion part etc.)

D. Materials

All fabricated steelwork used in the construction of the spud will be to manufacturing standard of classification society BV, GL, LR, DNV

All steel used to be blasted and shop primed both sides. Using DH36 and D690

All materials proposed will be selected to comply with the latest Health and Safety Rules.

Paint systems for hull protection will be of the highest quality (Hempel, Inter, Sigma, Jotun)

E. Welding

All welding will be performed in accordance with drawing and order and UniSite experience and all welding will be continuous and full penetration.

Welding seam preparation, welding method, welding material and consequent preheating temperature acc. to UniSite standards and approved by clients.

UniSite will control preheating, cooling down rate

Weld surface on the outside spud surface are to be grinded flush.

All welding to be examined UT and some to be examined X-ray.

F. Workmanship

The workmanship have good marine practice. Care are taken to ensure fair lines, smooth surfaces and neat welding.

G. Main particulars

 

MAIN PARTICULARS

Tolerance

High accuracy(ISO2768, ISO5817, ISO13920)

Material

DH36, D690 with Z-quality or other materials

Dimension(L*B*H)

As per drawing, as large as we can

OD

900mm-2800mm

Weight

60Ton~400Ton

Coating

Sa2.5 blasted and two or three layers painted with highest quality

Marking

as per clients' requirements

Inspection

material, construction, dimension, welding seam, non defective test, paint inspection

Experience

We made OD2600*63m with total 360Ton spuds for world top dredging company.

Others

Recyclable, in line with environmental requirements and standards, and reliable


Marine Spud

High Quality Dredge Spud,Customized Dredge Spud,Customized Weld Spud,Marine Dredge Spud

Unisite Group Ltd. , https://www.shipsparts.nl