Some problems that need to be noted when driving high-altitude trucks in hot weather

<

The drivers of high-altitude trucks enter the exposed car. Please do not rush to open the air conditioner. You should first lower all the windows or open the doors, and then open a big fan to speed up the air circulation, and then close the window and open the air conditioner in three or four minutes, so that the cooling effect is better. In addition, due to the low boiling point of formaldehyde, the release of high temperature when it is higher than usual, two or three percent, which makes the exposure of formaldehyde in high-altitude vehicles increased significantly, the first window ventilation can avoid attracting formaldehyde, benzene and other carcinogenic gases.

Mr. Zhao, an experienced rider, said that the four-window glass door can be lowered by 2 to 3 centimeters when parking, leaving a gap in the window to dissipate some of the heat. If you do not bother to use, you can also use the sunshade or sunshade car cover, which can reduce the interior temperature of 8 °C ~ 10 °C.

Do not open the air conditioner for a long time to open the window ventilation

Driving at high temperatures, many aerial vehicle owners like the air conditioner to enjoy cooling in the end. Maintenance experts said that the use of air conditioning time should not be too long, on the one hand, after a long time on the train to use air conditioning will make the condenser pressure is too large, causing damage to the refrigeration system, if the car has reached a comfortable temperature, you can turn off the air conditioning, Will be open again. On the other hand, long cycling of the air conditioner will reduce the amount of oxygen in the vehicle, and the air in the cabin will become more and more turbid, even with the feeling of lack of oxygen. If the combustion of gasoline is not complete at this time, carbon monoxide may also leak into the cabins of high-altitude vehicles , which may cause harm to the human body. Remember to switch between the internal and external circulations at regular intervals, and do not care if they do not open air conditioners. In particular, we must remind that when the car is not moving at a speed, it is best not to open the air conditioner for a long time, and not to sleep in the car. This may be dangerous.

Aluminum Die Casting Pulse Valve Dust Parts

Aluminum Die Casting Pulse Valve Dust Parts products
1. Die -cast Aluminium Pulse Valve Dust Parts products.
2. Strong bearing capacity.
3. Elaborated made to ex-change;
4 .Acceptable electric leakage;
5. Aluminum Die Casting suitable for communications, auto parts, lamp part series, water pump part series, power tool series, radiator part series, Aluminum Die Casting Pulse Valve Dust Parts and other series products.



Applications:
Aluminum Die Casting Pulse Valve Dust Parts also called diaphragm valve acts as a [switch" for compressed air in the dust clean blowing system for pulse bag filters. It is controlled by the electric signals from the pulse-jet control device. This system cleans the filter bags cluster by cluster with high-pressure blowing to keep the pressure resistance of the baghouse within a pre-set range, and thus ensure the processing capability and the dust-collecting efficiency of the baghouse.


pulse valves dust collectors products advantage
1. easy & fast to set up pulse valves dust collectors
2. Formaldehyde to release a quantity to reach national standard, health protection E0
3. Design novel, variety complete, fashion, ascending life style


Pneumatic Pulse Valve,Pulse Valve Dust Parts,Aluminum Die Casting Pulse Valve,Die-Cast Aluminum Dust Collector Valves

Ningbo WEIBO Molding&Machine Co.,Ltd. , https://www.diecasting-manufacturers.com