Â
Â
- Yokohama type fender net type
- Sling pneumatic rubber fender
- Ribbed pneumatic rubber fender
Floating pneumatic rubber fender, Yokohama fender, ship airbags,Super cell fenders (SC type), Cone fenders, Super Arch fenders (type SA), Cylindrecal fenders (Type Y), Semi-circular fenders (Type D), Type GD fenders, Type I fenders, Type U fenders,Turn cell fenders, Type π rubber fenders, Rubber ladder, Rubber fenders for tug boats, PVC yacht fenders etc.
 Mearsk , MSC, COSCO, CMACGM, OOCL, APL, NYK , NEW YORK port, KOBE port, YOKOHAMA port, Singapore port, ANTWERP port, LONDON port, HAMBURG port, DUBAI port, QINGDAO port, SHANGHAI port etc.
2.Product description:
Penumatic rubber fender with chain protection
(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. ShunDehai rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.
(2) Ultra low back pressure
The inside air of Shundehai pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.
(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of Shundehai sea inflatable fender, its adaptability is much higher than other fender.
Â
(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
Â
Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.
Â
(6) Aohai inflatable fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock.
3. Specifications and Measures:
Fender performance specification Â






Â
It can be applied widely in high-rise civilian building, bridge and water-conservancy project, big-span industrial workshop and high-rise building, etc. the Tower Crane is high level slewing self-erecting tower crane which adopts horizontal jib and trolley-jib. The main features as follows:The tower crane with features as high working speed, stead work condition and high efficiency.Hoisting jib has 48m or 54m and 60m three ranges. This meets project needs more widely.
Crane Parts,Crane Spare Parts,Crane Dozer Parts,Construction Hoist Crane Parts
Jinan Shanghangda Machinery Co., Ltd. , https://www.jinanshdmachine.com