The reporter recently learned from Sinopec's Ma'anshan Petroleum Branch that an investment of 45 million yuan and the first new type of vehicle clean energy-lng (liquefied natural gas) gas station project in Xiangshan Town, Xiangshan Town, will be promoted in an orderly manner and will be launched at the end of 2013. The hazy weather that frequently appeared at the end of 2012 triggered public concern about air pollution. LNG vehicles powered by natural gas are of great significance for reducing environmental pollution and promoting green and low-carbon development due to their environmental protection. “The advantage of LNG fuel is energy saving and environmental protection, which can effectively reduce noise and pollution.†On April 8, Wang Zheng, deputy general manager of Maanshan Petroleum Branch of Sinopec, introduced that the use of liquefied natural gas as a clean energy for large trucks could reduce harmful exhaust emissions. More than 85% of the material, soot particles close to zero emissions, no lead, benzene, sulfur and other harmful substances, can effectively reduce pm2.5. This move is not only another important measure for the city to promote clean energy and protect the urban environment, but also the city's first use of LNG vehicle LNG in the province. It is understood that the natural gas currently used in taxis and environmental protection buses in our city is CNG (compressed natural gas). In comparison, the upcoming lng (liquefied natural gas) power is stronger, the vehicle driving range is longer, and the fuel cost is also lower. “The transportation cost of LNG can be reduced by 10% compared with diesel, and the economic benefit is obvious. The driving mileage is much higher than that of diesel.†Hu Ligang, chief of the company’s infrastructure department, introduced that after a large truck filled with a box of LNG, he ran on the 4th and 5th. 100 kilometers, no problem at all. Compared with traditional diesel, compressed natural gas, and gasoline, the cost of driving vehicles using liquefied natural gas is much lower. Taking the city's annual consumption of 150,000 tons of diesel and the price of 8,000 yuan per ton of oil as an example, the use of liquefied natural gas can reduce the transportation cost by 10% compared with diesel. Environmentally-friendly liquefied natural gas can save users 160 million yuan a year. It is understood that the first lng refueling and refueling station in Ma'anshan City was rebuilt on the basis of Sinopec's original Xiangshan Petrol Station, covering an area of ​​5.7 mu. There is a lng liquefied natural gas dispenser and a 2-bar air-injector with a gas storage capacity of 50 tons; another 4 refuelling machines, 8 refueling guns. The project has invested 45 million yuan, of which, the investment in the new lng LNG refueling equipment has reached more than 9 million yuan. At present, the construction plan of the project has been approved by the municipal government and the Provincial Energy Bureau. It has been reported to the Provincial Department of Commerce for planning and confirmation. It will be completed and put into use during the year, and will be first promoted on heavy trucks and construction vehicles.
Hydraulic metal machine is mainly applicable to steel mills, recycling and processing industries and non-ferrous metal smelting industries. Hydraulic Baling Machine can squeeze all kinds of metal scrap (steel shaving, waste steel, waste aluminum, waste copper, waste stainless steel and scrap automobile waste, etc.) into cuboid, octagon, cylinder and other shapes of qualified charge, which can reduce the transportation and smelting cost, and improve the speed of furnace. It is mainly used for cold pressing under normal conditions for scrap metal scraps, scrap steel scraps, waste oil tank, disassembling car shell and other metal scraps with a thickness of less than 3mm. Cold pressed into blocks for easy storage and transportation or furnace.
Features:
1) Hydraulic drive, smooth and noiseless work, fast extrusion speed, large extrusion force, compact package block, not easy to be scattered.
2) high quality national standard steel plate with advanced welding technology to make the mechanical parts strong and durable, low failure rate, long service life.
3) the oil cylinder seal is imported glyd ring, good sealing performance, strong pressure resistance.
4) Convenient installation, small floor space, no foundation, foot, etc. Simple operation, detachable and PLC automatic mode.
5) Cold extrusion will not change the metal material and increase the utilization rate.
Metal Shavings Baler, Scrap Metal Baler, Waste Metal Baler, Sheet Metal Baler, Metal Scraps Baler Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobalingmachine.com