AH(R) series cantilevered horizontal, Centrifugal Slurry Pump can also be used as tailing thickener slurry
pump, which is heavy and robust pump capable of handling tough and abrasive
duties. It is designed for excellent performance, low energy consumption, long
wear life and easy maintenance.
Product
Feature
1.Good interchangeability of metal and
rubber parts.
2.Multiple shaft sealing options for every
application: packing seal, expeller drive seal, mechanical seal.
3.Heavy duty roller bearings.
4.The clearance between the impeller and
the cover plate could be adjusted to ensure the pump to operate at high
efficiency point.
5.A number of pumps can be connected in
series for use.
AH(R) Series Tailing Thickener Slurry Pumps AH(R) Series Tailing Thickener Slurry Pumps,Tailing Thickener Slurry Pumps,Vertical Tailing Thickener Slurry Pumps,Thickener Feed Bombas Slurry Pump,AH(R) Series Mine Tailing Slurry Pump Shijiazhuang Soarho Machinary Co.,Ltd , https://www.xhslurrypump.com
FC-630 Double Shaft Multiple Drawing Bobbins Active Pay-off
Machine performance parameters:
The pay-off stand is constant tension, no reverse the pay-off double disk, can be used for single pay-off equipment pay-off, also can be used for drawing wire harness, and two dish line not interfere with each other, independent, pay-off, easy to operate, can efficiently save covers an area of space.
1. Put/size range: φ 0.08-0.5 mm;
2. The biggest MAX200m/min, the linear;
3. The pay-off plate size: Outside diameter φ 630 * hole φ 125 * 475 * in the wide width of 400 mm;
4. Tension adjustment: In the swinging rod are installed on cylinder, but through the governing valve adjusting cylinder pressure to change the pay-off tension, also can use a heavy hammer adjust tension;
5. The driver: The wire disc by belt brake 1.5 KW three-phase frequency conversion motor driven by special synchronous belt; The inverter control the motor.
6. Brake: Motor internal disc springs pads action, brakes motor;
7. Adjustable speed: By the sensor signal transmission swinging rod to control the speed of frequency converter, pay-off and host (such as stranding machine) to keep the same;
8. The wire disc loading and unloading: Use the hydraulic forklifts (by advertisers) manual handling the wire disc;
9. Painting: Apple green(or paint according to the customers' require)
10. Weight: 600 kg