• Model NO.: TR575
• Material: EPDM Rubber,Brass
• Trademark: JRL
• Specification: 33mm
• HS Code: 848130000

• Type: Tire Valve
• Warranty: 12 Months
• Transport Package: 100PCS/OPP Bag 1000PCS/CTN
• Origin: China

 TR575 Truck Wheel Tubeless Tire Valve Stem/China tire Valve factory manufacturer

Specification:

• Tubeless Truck Clamp-In Valve for Rim hole: 5/8" (16mm)
• Length: Approx. 36mm/1.42 Inch
• Bottom Diameter: Approx. 19mm/0.75 Inch
• Material: Brass

Water Cooled Solvent Recovery Machine is our new introduction of new products, cooling methods using cold water and frozen water, with energy saving, no noise, no heat, recovery speed and other advantages. However, the conditions for the use of equipment must have water or frozen water.Water cooled Solvent Recovery Machine
Advantages of water cooled solvent Recovery Machine
1 cooling Taiwan parts, the recovery rate increased by 80%;
2 double station machine dumping operation, operation more safe;
3 Japan OMRON intelligent temperature control, to solve the foaming problem;
4 timing shutdown configuration to avoid gas explosion;
5 high boiling point solvent, vacuum pump;
6 rectangular support, solid and stable, not inclined;
7 the United States original diaphragm pump and Calstar® vacuum pump, the solvent remote transmission. Labor cost reduction;
8 Japan original circulating heat oil pump, heating more uniform, the recovery rate increased by 50%;
9 Italy original hydraulic scraper power; cleaning slag 1 minutes to complete;
10 explosion-proof automatic feeding system; more effort;
11 30 seconds to complete the slag discharge system.
Water cooled solvent recovery equipment
Water cooled solvent recovery device
Water cooled solvent distillation machine

Water Cooled Solvent Recovery Machine

Ether Recycling Machine,Methanol Recycling Machine,Butanone Recovery Equipment,Methyl Acetate Recycling Machine,Acetone Recycling Machine

SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , https://www.calstarkb.com