PP103 series cnc Punching Machine special
CNC machine for punching and marking of steel plates in the field of steel
tower industry. It is also used to punch and mark of steel plates of other
industries.
The main machine is a special hydraulic
press which is equipped with pressure apparatus and drill drift holding device.
There are three drill drifts on the holding device. They are used to install
punch and marking apparatus.The body of the machine uses Type C double-plate
jointing structure with the advantage of rigid and high power of anti-eccentric
load. The main cylinder is fixed on the body by four high strength bolts which
is easy to install and convenient for maintenance.
Product Feature:
1. The machine-frame is made by C-type plate
welding, with good rigidity and big handling space. The machine sets three
die-stations (two punching, one marking), automatic switching die-stations.
Clamping system can be adapted to different workpiece, with reference block,
and workpiece supported by rolling-ball working table. X & Y axis action controlled
by servo motor and ball-screw driving and PLC, control the position of
punching, so as to make the whole machining process automatically. Operator
input the workpiece program, it can be used repeatedly
2. Adopt CNC technology, servo motor infeeding,
with high efficiency, stable workpiece precision.
3. Important
functional components adopt modular assembly, easy to repair it.
4. Achieve
punching and marking on the one plate.
5. Easy
programming, can read CAD drawing and also can use the program generated by
lofting software. It can ready TEKLA lofting software files, such as NC1
format.
6. With self-diagnosis failures function.
7. X, Y axis are driven by servo motor + ball
screw + linear guide, the precision is better.
The
Work Table
CNC feeding worktable can be divided
into fixed part and movable part. The fixed part is set on the ground which is
linked with main unit. To the fixed part, alongside the front-back direction of
main unit is called Axis Y, and then the fixed part is called Axis Y rack. The
movable part is installed on the Axis Y rack through the guide bush which is
rolling in straight line, under the driven by the servo motor and ball screw
shaft, the movable part is running though the Axis Y to realize precise
positioning. To the movable part, alongside the left-right direction of main
engine is called Axis X, and then the movable part is called Axis X rack. Axis
X rack is closed to the head of the main engine, on both sides which is
installed a supporting plate with universal transmission ball to support the
work piece. At the back of the Axis X rack, two rolling guide bushes are
installed with a sliding plate on the direction of Axis X. Under the driven by
the servo motor and ball screw shaft, the sliding plate can running though the
Axis X to realize precise positioning.
The
Hydraulic Clams
There are two
hydraulic clamps on the sliding plate, their location can be moved alongside
the Axis X so as to adjust different work piece. While in adjustment, loose the
screw and press plate, move the clamp by hand to the adequate place, fasten the
screw and press plate again. In the vertical direction, the clamp is in the condition
of floating. To the joint plate with slight unevenness, they may be arched
during punching, and then the clamp will be moved accordingly to avoid the
breakage of clamp. A original location device is installed at the left side of
the sliding plate, when the hydraulic cylinder push the locating plate at an
angle of 90°, the locating surface is just at the same direction to the Axis Y,
and form a rectangle with two clamp surfaces (direction of Axis X) to calibrate
the original place of joint plate.
The Punching Unit
There
are one service position of marking and two positions of punching on the
machine. While in marking, put the required characters into the character box and
fill the vacancy with blank characters, then screw the bolts to tight, insert
the character box to the fixed groove at the top of the piston rod. The
punching mould shall be selected in accordance with the aperture and plate
thickness. The punch is fixed on the rod to tighten the screw, and put the
hollowing block into the base of cavity die.
The Manual Lubrication System
Now
we equipped the machine with manual lubrication system, previous client need to
lubricate the punching and marking dies one by one, now they just need push the
handle, it can lubricate the punching and marking dies simultaneously. The
operator don`t need reach out to the inside of machine, It`s more convenient
and more security.
When
package the machines , our workers will fasten every parts by steel wire rope,
so as to when the machine on road, it will not move, ensure security of cargo.
QUALITY MAKE BRAND, HONESTY WIN MARKET!
INNOVATION PROMOTE DEVELOPMENT, HARMONY
CONVERGE TALENTS.
Flange Punching Machine,Flange Hole Punching Machine,Flange Corner Punching Machine,Punching Flanging Press Machine Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com
4m width galvanized wire diamond mesh weaving chain link fence machine(LW20-100)
Description:
1.Chain link fence machine for manufacturing chain link fences of different sizes;
2.The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE take place.different gap sized;
3.After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process.
4.Once the stitching is complete the woven is manually glided down to enable the next stitch to take place;
Features:
1.The chain link is automatically wound to form rolls when the desired length is manufactured;
2.The machine is controlled by PLC automatic controller,so only one worker is needed to operate it;
3.Electric system: --Japan mitsubishi PLC origin
--Servo motor
--Low-voltage electrical from Germany Schneider
--Electric&Machinery from Taiwan Teco Electric
--Clutch from Taiwan Ya Co.,ltd
Technical Parameter:
Type
LW20-100
Mesh width
2--4m
Mesh opening
30--100mm
Wire diameter
1.8-4.0mm
Production
70-80m2/h
Weight
4200kg
Power
9kw
Finished Products:
Chain link fence is extensive used as fences for playground and gardens, highway,Railway,airport,port,residence,etc
Loading Picture:
Certification:
Contact :
If you have any needs of our machine, welcome to contact me, I will reply ASAP.
Â
4m Width Galvanized Wire Diamond Mesh Weaving Chain Link Fence Machine
Model NO.: lw20-100
Controller: PLC
Dimension: 4200*2200*1700mm
Wire Diameter: 1.8-4.0mm
Mesh Width: 2-4m
Trademark: JIAKE
Transport Package: Plastic Package
Specification: 2000kg
Origin: Hebei, China