Teflon Film Slitter Machine PTFE Material

<

Model NO.: PTFE
Origin: Jiangsu, China
HS Code: 8477900000
Model NO.: PTFE
Origin: Jiangsu, China
HS Code: 8477900000
Overview:
 The slitter is specialized design for PTFE film tape, use for slitting 3-10mm width PTFE film tape.
 
Main parameters:
1.      The applicable width of film tape: Φ0.05~Φ0.25mm
2.      The width after slitting:3.5mm-10mm (customers can provide dimension)
3.      The bobbin diameter after slitting: OD≤Φ250mm, Inner bore Φ76.5mm
4.      Film tape paying out drum (raw material): OD≤Φ300mm, Outer Width                          ≤Φ120mm, Inner bore Φ76mm.
5.      Paying-off mode: magnetic powder tension paying-off.
6.      Taking-up mode: Two units separated type, individually adjusting,
7.      Taking-up power: 1/4HP 1/10 reduction motor, frequency converting control               speed.
8.      Pallet: the thickness of organic glass is 2mm,3m equip with 50 piece of                      Φ250mm pallet.
9.      Accessories: various specification of slitting pad and some Φ76.5 spec. core            tube.
10.  Blade: use for GEELY double-edge blade.
11.  Operating mode: table type, paying-off at left side taking-up at right side.
12.  Accessories: equipped with a tool case and a unit of control cabinet.
13.  Thread tape roller: whole wrap up with PU rubber.
14.  Taking-up tape fixed tape: stainless steel universal adjustable pole.
15.  Paint: RAL-5015 BULE
 
Accessories:
Provide an electrical control diagram, a drawing of easily damaged parts, an instruction brochure, a tool case.
  Overview:
 The slitter is specialized design for PTFE film tape, use for slitting 3-10mm width PTFE film tape.
 
Main parameters:
1.      The applicable width of film tape: Φ0.05~Φ0.25mm
2.      The width after slitting:3.5mm-10mm (customers can provide dimension)
3.      The bobbin diameter after slitting: OD≤Φ250mm, Inner bore Φ76.5mm
4.      Film tape paying out drum (raw material): OD≤Φ300mm, Outer Width                          ≤Φ120mm, Inner bore Φ76mm.
5.      Paying-off mode: magnetic powder tension paying-off.
6.      Taking-up mode: Two units separated type, individually adjusting,
7.      Taking-up power: 1/4HP 1/10 reduction motor, frequency converting control               speed.
8.      Pallet: the thickness of organic glass is 2mm,3m equip with 50 piece of                      Φ250mm pallet.
9.      Accessories: various specification of slitting pad and some Φ76.5 spec. core            tube.
10.  Blade: use for GEELY double-edge blade.
11.  Operating mode: table type, paying-off at left side taking-up at right side.
12.  Accessories: equipped with a tool case and a unit of control cabinet.
13.  Thread tape roller: whole wrap up with PU rubber.
14.  Taking-up tape fixed tape: stainless steel universal adjustable pole.
15.  Paint: RAL-5015 BULE
 
Accessories:
Provide an electrical control diagram, a drawing of easily damaged parts, an instruction brochure, a tool case.
 

Emergency Elevator in Hosptial, Bed Lift , Emergency Bed Lift, Patient Emergency Elevator.


BBC Hospital Elevator

Specification:

  • Capacity can be1,600kg
  • Speed can be1.0m/s,1.6m/s,1.75m/s
  • The motor can be geared or gearless, roomless Hospital Elevator is also available.
  • Car wall with spray-coated sheet steel , Available in hairline ,mirror and etched stainless steel

Functions:

  • Configurable uC based lift controller
  • Automatic Evacuation in case of mains failure(optional )
  • fully collective selective control
  • Door Light curtain protection
  • Overload protection
  • Emergency call system
  • Rolling direction indicator
  • Fire Emergency Return
  • Arrival Indicator and Gong
  • Car ventilation and light
  • Attendant Service mode

 

Hospital Elevator Button

Emergency Elevator In Hosptial

Emergency Elevator in Hosptial, Bed Lift, Emergency Bed Lift, Patient Emergency Elevator

Shandong Bester Elevator Co., Ltd. , https://www.besterlift.com