Our products including:
Hand held metal detectors
Under car search mirrors





MD3003B1 hand detector hand held bomb detector

MD3003B1 hand held metal detector

MD3003B1 hand held metal detector is also called small landmine detector, extensively used in landmine excavation force in the army.
Easy Operation, exquisite design, convenient storage, large detecting area, stable performance and low trouble rate.
High sensitivity, objects with the size of a pin or smaller can be detected easily. Sensitivity can be adjusted according to actual application.
The best about this model is that, it's most cost-efficient among models of the same category.

 

Package include:
1 x metal detector
1 x belt holster
1 x english manual

 

Key features of MD3003B1 hand detector hand held bomb detector
Mini type ,Simple operation
High sensitivity : can detect the size of pin .
When metal is detected with the sound ( or vibration ) and light alarm function
The alkaline battery alarm proportion of 10 % to 15 % of work , can work for 40 hours .
9V battery the alarm will automatically continuous

Parameters of MD3003B1 hand detector hand held bomb detector

Applications of MD3003B1 hand detector hand held bomb detector
Airports , railway stations , docks , prisons , customs , border control and other security departments of security checks;
Medicine, food , commercial quality inspection system;
Precious metal detection ( such as gold and silver jewelry factory ) , and other security checks.

Notes :
1, When the sensitivity adjustment too high, the boot will be issued after the continuous alarm sound, the sensitivity can be reduced.
2, Cut off the power after use. Long-term should not remove the battery to prevent overnight, so as not to damage the circuit.
3, The probe is fixed against a crackling sound when the metal will stop only when the metal continues to sweep audible.
4.When turned on, the green light to dark and continuous alarm indicates that the voltage is less than has been unable to work , you should replace the battery .








 

Our products including:
Hand held metal detectors
Under car search mirrors





MD3003B1 hand detector hand held bomb detector

MD3003B1 hand held metal detector

MD3003B1 hand held metal detector is also called small landmine detector, extensively used in landmine excavation force in the army.
Easy Operation, exquisite design, convenient storage, large detecting area, stable performance and low trouble rate.
High sensitivity, objects with the size of a pin or smaller can be detected easily. Sensitivity can be adjusted according to actual application.
The best about this model is that, it's most cost-efficient among models of the same category.

 

Package include:
1 x metal detector
1 x belt holster
1 x english manual

 

Key features of MD3003B1 hand detector hand held bomb detector
Mini type ,Simple operation
High sensitivity : can detect the size of pin .
When metal is detected with the sound ( or vibration ) and light alarm function
The alkaline battery alarm proportion of 10 % to 15 % of work , can work for 40 hours .
9V battery the alarm will automatically continuous

Parameters of MD3003B1 hand detector hand held bomb detector

Applications of MD3003B1 hand detector hand held bomb detector
Airports , railway stations , docks , prisons , customs , border control and other security departments of security checks;
Medicine, food , commercial quality inspection system;
Precious metal detection ( such as gold and silver jewelry factory ) , and other security checks.

Notes :
1, When the sensitivity adjustment too high, the boot will be issued after the continuous alarm sound, the sensitivity can be reduced.
2, Cut off the power after use. Long-term should not remove the battery to prevent overnight, so as not to damage the circuit.
3, The probe is fixed against a crackling sound when the metal will stop only when the metal continues to sweep audible.
4.When turned on, the green light to dark and continuous alarm indicates that the voltage is less than has been unable to work , you should replace the battery .








 

Gasketed plate heat exchangers, also known as gasketed plate-and-frame heat exchangers (GPHEs), provide efficient heat transfer in compact equipment with a small footprint - much smaller and more efficient than shell-and-tube heat exchangers.
Plate heat exchangers are designed to optimize heat transfer, because the corrugated plates provide by far the greatest surface area through which the heat can be drawn from one gas or liquid to the other.
The units also have a flexible design and are easy to service and maintain.
Gasketed plate heat exchangers benefits:
Precision heat transfer - closer approach temperature, true counter current flow, 80-90% less hold-up volume
Low overall cost - low capital investment, reduced installation costs, limited maintenance and operating costs
Maximum reliability - less fouling, stress, wear and corrosion
Environmentally responsible - minimum energy consumption for maximum process effect, reduced cleaning
Easy to expand capacity - simply add or remove plates on the existing frame
The product range is extremely wide and is used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
 
Gasketed plate heat exchangers may be the industry standard for general heating and cooling duties, but the technology inside a GPHE is far from standard. All plate heat exchangers are NOT created equal, and we've seen the consequences of choosing heat exchangers purely based on cost. We understand cost is important, but in most circumstances the costs to repair or replace units, as well as the inefficiencies of undersized units, far outweigh the upfront capital cost savings.  

Types of gasketed plate heat exchangers

Industrial - an extremely versatile range of heat exchangers for use in all types of industries
AlfaQ AHRI certified - similar to Industrial GPHEs, but are AHRI certified for HVAC applications
Industrial semi-welded - used in refrigeration when gaskets are not suitable for one of the media and when higher design pressures are needed
WideGap - used for applications involving fibrous liquids, highly viscous fluids, and fluids containing coarse particles
AlfaVap evaporators - tailor-made, rising film plate surface evaporator
AlfaCond condensers - a compact, plate surface vacuum condenser
Diabon - graphite Heat Exchanger used for tough corrosive media

Heat Exchanger Gasket

Heat Exchanger Gasket,Plate Heat Exchanger Gasket N35,Fkm Gasket Of Plate Heat Exchanger,A085 Heat Exchanger Gasket

Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com