Overview

A Square-Ring is a sealing device made in the form of a torus (round top view), with a square shaped cross-section (side view).

Other names for Square-Rings would be Washer Rings, Lathe-Cut Rings, TetraSeal

The primary reason for using a Square-ring in a sealing application is that they perform the sealing function in a superior manner - and at a cost lower than any other comparable sealing device. For existing applications, there is no need to change the design or procedures. Square-rings fit in O-ring grooves and are interchangeable size for size.

Square rings are available in a variety of rubber and plastic materials such as Buna, Viton, EPDM, Teflon, etc. In most static applications, a square ring will serve as a direct replacement for an O-ring and generally will perform a high pressure sealing function as well as or better than an O-ring.

Square Ring Sizes
We primarily stock American Standard (AS568) sizes of square rings in Nitrile and Viton. We can also supply square rings to metric dimensions.

Standard square rings have the same I.D. as the AS568 sizes. However, the Cross Section dimension is slightly smaller for square rings. The chart above shows the square ring cross sections for the American Standard series sizes.

Features of Square Rings:
Interchangeable with O-rings size for size (Standard AS568A sizes)
Uses same groove as O-ring
Can be used for radial seals
Material is homogenous, no joints, no laminations
Edges accurately formed
Extreme close tolerances held on cross-section, I.D. and O.D.
Controlled surface smoothness, hardness, elasticity, toxicity, texture
The modern, economical option for static applications
Available in many compounds



Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.

Overview

A Square-Ring is a sealing device made in the form of a torus (round top view), with a square shaped cross-section (side view).

Other names for Square-Rings would be Washer Rings, Lathe-Cut Rings, TetraSeal

The primary reason for using a Square-ring in a sealing application is that they perform the sealing function in a superior manner - and at a cost lower than any other comparable sealing device. For existing applications, there is no need to change the design or procedures. Square-rings fit in O-ring grooves and are interchangeable size for size.

Square rings are available in a variety of rubber and plastic materials such as Buna, Viton, EPDM, Teflon, etc. In most static applications, a square ring will serve as a direct replacement for an O-ring and generally will perform a high pressure sealing function as well as or better than an O-ring.

Square Ring Sizes
We primarily stock American Standard (AS568) sizes of square rings in Nitrile and Viton. We can also supply square rings to metric dimensions.

Standard square rings have the same I.D. as the AS568 sizes. However, the Cross Section dimension is slightly smaller for square rings. The chart above shows the square ring cross sections for the American Standard series sizes.

Features of Square Rings:
Interchangeable with O-rings size for size (Standard AS568A sizes)
Uses same groove as O-ring
Can be used for radial seals
Material is homogenous, no joints, no laminations
Edges accurately formed
Extreme close tolerances held on cross-section, I.D. and O.D.
Controlled surface smoothness, hardness, elasticity, toxicity, texture
The modern, economical option for static applications
Available in many compounds



Now our company is specialize in producing seals of these materials: Viton A, Viton B, Viton F, Viton GF, GLT, GFLT, ETP, Aflas, ACM, AEM, VMQ.

Besides, we also product below item, such as PTFE Rubber Diaphragm, clamp seals, P seals, H seals, Casing Tubing Hanger Packers, FS Casing & Tubing Seal, Springsele, Teesele, Valve Rod Seal, Metal End Cap Seal, and so on.

We have the highest quality and lowest costs in the industry delivered on time.

Jeans Sewing Machine is a specialized kind of industrial sewing machine used for jeans or denim for heavy duty sewing application. The material is differ from other wearing and dressing, including jeans and canvas among many other new invented medium fabrics. Chuanghui Sewing is able to help you out in selecting the best denim sewing machine to meet your demand of sewing heavy fabrics.

Jeans Sewing Machine

jeans sewing machines industrial,sewing machine jeans,jeans sewing machine automatic,tailoring machines sewing jeans,double-needle sewing machine for sewing jeans

DONGGUAN CHUANGHUI SEWING MACHINE CO.,LTD , https://www.ch-sewing.com