Fig. 1 Machining movement diagram
KOREAN Vehicle Clutch Kit
Korean Vehicle Clutch Kit range Hyundai, Kia, Daewoo. Most
of them are applicable for passenger car and light commercial vehicle.
With over 20 years` experience of Clutch Cover, clutch
disc and clutch kit assembly, you can rely on us to supply you with quality
products, backed up by exceptional customer service.
OE No., SACHS No., LUK No., EXEDY No., AISIN
No., VALEO No. are all available for us. It is our pleasure to be on service of
you.
If you have any questions, please let me know
and we will try our best to support the best price and great service.
I look forward to mutual development with you
step by step.
Korean Vehicles Clutch Kit,Daewoo Clutch Kit,Hyundai Clutch Kit,Kia Clutch Kit Yuhuan Shouyuan Machinery Co., Ltd. , https://www.sycclutch.com
The main movement is the most basic movement that causes the workpiece and the tool to move relative to each other for cutting. The main movement has the highest speed and consumes the largest amount of power. In cutting motion, there is only one main movement. It can be done by the workpiece or by the tool. It can be a rotary motion or a linear motion. For example, the rotary motion of the workpiece on the lathe; planing and reciprocating of the workpiece when the planer is planed; the linear reciprocating motion of the planer; the milling cutter on the milling machine, the drill on the drill, and the rotation of the grinding wheel on the grinder are all during cutting The main movement (see Figure 1). 
a) Turning the outer circle b) Milling plane c) Drilling d) Grinding the outer plane e) Planing plane
Feed motion is the continuous cutting of the cut layer to gradually cut out the entire surface. In other words, without this movement, you cannot cut continuously. Feed movements are generally slower and consume less power and may consist of one or more motions. It can be continuous or intermittent. Turning outside the circle, milling plane, planing plane, drilling, grinding outside the cutting movement of the garden as shown in Figure 1.
Classification and composition of cutting motion
Cutting motion can be divided into main movement and feeding movement.