Ningxia Academy of Electric Power Researches Jiangjianan Digital Substation Commissioning

<

Ningxia Electric Power Institute launches the trial of diesel generators for Jiangjianan Digital Substation | Diesel Generator Price / 2010-09-01

Reports Recently, Ningxia Electric Power Research Institute automatically sent two intelligent substation technicians to the site of the Jiangjianan 330kV substation, and officially started to stay at the commissioning point.
Through three-and-a-half-month plant commissioning and acceptance from March to July, the interoperability between Xu Ji’s background integration, Sifang intelligent terminals, and Nanrui and Nanfang’s smart IEDs used in Jiang’s 330kV smart substation project Testing has basically eliminated various defects. This commissioning will formally establish a small environment for factory debugging into a large-scale environment system for the whole station. It has a complete station-controlled MMS network, a 330kV line string, and a line-to-line GOOSE dual-network and point-to-point trip logic.
Jiangjianan 330kV smart substation is the first smart substation adopting a peer-to-peer structure after the publication of the Guidelines for Smart Substation of the State Grid, and it is also of great significance to shoulder many important tasks such as power supply for Taizhongyin Electrified Railway and power transmission at Wuhu Power Plant. The on-site commissioning schedule was tight and the task was heavy. The leaders at all levels of the company paid great attention to it and successively visited the site during the construction period. In order to ensure that the project will be put into operation on schedule, nearly 20 technicians are dispatched by the relevant manufacturers, Xu Ji, Sifang, Nanrui, and Nanzi, and all grass-roots units will also send people to participate in training. As the main force of commissioning for XJ project, the automatic room of Ningxia Electric Power Institute spares no effort to participate in it from the beginning to the end. It actively communicates and coordinates. Apart from the infrastructure construction unit, the technical staff of this room is the team of early settlement.
The professional backbone of the automatic room of Ningxia Electric Power Institute has learned and mastered a large number of key technologies and difficult problems during the project commissioning phase, and has accumulated a lot of valuable experience, which has been recognized by the leadership of the hospital and related leaders of the company.
Next:Installation, use and regulation of marine diesel generator sets
Previous:Northwest Power Grid fully supports the construction of the Qinghai-Tibet network project

Coarse Sand Pump



Product Introduction:
 

MG serie pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. MG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance. Our MG pump is including:  Sand Pump , Dredge Pump , Sand Suction Pump, Coarse Sand Pump, Pulp And Paper Gravel Pump, Sugar Beet Handling Gravel Pump.

Product Features:
-Single casing
-Wide wet-passage
-Wear resistant metal wet end part, long service life
-Discharge direction can be oriented at any degrees
-Good performance of NPSH
Application Range:
 
Size: 4 inch to 14 inch
Capacity: up to 4320 m3/h
Maximum head: up to 80m

Coarse Sand Pump

Coarse Sand Pump,Sand Dredge Pump,Wear Resistant Pump,Centrifugal Dredge Pump

SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com