On May 18th, the inaugural meeting of the Standardization Committee of China Automobile Refit Products Association was held at the China Automotive Technology and Research Center. The conference invited the leaders of the Market System Construction Department of the Ministry of Commerce, the Certification Department of the Certification and Accreditation Administration, the Road Traffic Safety Research Center of the Ministry of Public Security, and the China Automobile Center to come from the main engine factory, testing organization, certification body, conversion enterprise, and modification products company. Dozens of relevant business representatives from the unit attended the meeting. Ultrasonic transducer;Water separator;Electronic valve;fuse;Delayer Ultrasonic Welding Head,Small Ultrasonic Transducer,Cylindrical Ultrasonic Transducer,Ultrasonic Multi Power Transducer Changzhou Tengjie Machinery Equipment Co., Ltd. , https://www.ultrasonictj.com
China Automobile Refit Products Association is a first-level industry association established in July 2014 with the approval of the Ministry of Civil Affairs and the Ministry of Commerce to provide business guidance. It is committed to standardizing and leading the development of the automobile modification and modification supplies industry. The China Automobile Refit Products Association Standardization Professional Committee (hereinafter referred to as the “PBCâ€) is a professional branch established under the guidance of the China Automotive Refit Products Association and based on the China Automotive Technology and Research Center.
Automobile consumption type modification means that after the consumer purchases the car, the vehicle's components are upgraded or personalizedly modified/added according to their own preferences and individualized use requirements. At present, although China's "Road Traffic Safety Law", the national mandatory standard "Safety Technical Conditions for Motor Vehicle Operation" (GB7258) and other relevant national laws, standards and management regulations do not explicitly prohibit the development of the conversion industry, but due to the lack of uniformity in China The scope of vehicle modification management, operational specifications, and testing and certification of national standards after conversion have led to confusion in the law enforcement departments of local public security departments.
Gao Hesheng, deputy director of the China Automotive Technology and Research Center, put forward three requirements in his speech. First, the automobile consumption type modification should put safety first; second, the standard formulation should be moderately advanced, which can meet the industry demand in the next five years; While properly drawing on international experience, we will strengthen the study and judgment of China's national conditions and must follow the path that suits China's national conditions.
At the meeting, Li Rengui, president of China Automobile Refitting Products Association, read the "Reply on agreeing to establish a standardization professional committee". Huang Yonghe, head of the preparatory group of the PBC, introduced the preparatory report of the PBC. Subsequently, Huang Yonghe, the chairman of the Standardization Committee, received the plaque from the chairman of Li Rengui, marking the official establishment of the Bid Committee.
Hou Hualiang, Secretary General of the Standardization Professional Committee, made a work plan report, and made a key report on the work objectives, work plans and safeguard measures of the PBC, and submitted it to the General Assembly for deliberation. All the committee members said that they will actively support the work of the special committee, and proceed from their respective areas of expertise, and put forward very good opinions and suggestions on the "work plan (draft)", and formulate the standard scope, international standard exchange, and car modification system in the near future. Construction and other suggestions and suggestions.
The establishment of the Standardization Professional Committee and the active development of various work in the future have important historical significance for promoting the formulation of China's automobile consumption-type modification industry standards and guiding industry norms and healthy development. The Standards Committee will give full play to the strength of the industry organization, and together with all member units, under the guidance of the relevant government departments and the China Automobile Refit Products Association, carry out the development of the required standard for the industry, and strengthen the implementation of the promotion and promote the management of the industry. Institutional construction promotes the application of modification standards in a wider range of industries.
Li Rengui, president of the China Automobile Refitting Products Association, pointed out in the concluding speech of the conference that the China Automobile Refit Products Association will actively bridge the gap between the industry and the competent authorities, and will also strive to improve the system construction, conduct international exchanges, and strengthen personnel training and transportation. Guide and promote the development of the standardization of the automobile modification industry and improve the development level of the industry.