What are the characteristics of the high gradient magnetic separator?

<

The high gradient magnetic separator is a new type of strong magnetic separator developed on the basis of the strong magnetic separator. It is characterized by a uniform magnetic field through the magnetization field of the entire working volume, which means that regardless of the processing capacity of the magnetic separator. Size, any particle in the working volume is subjected to the same force as the particles in any position, the magnetization field is uniformly passed through the working volume, the medium is uniformly magnetized, and the magnitude of the gradient is the same at any position in the magnetization space, but Compared with general magnetic separators, the magnetic field gradient is greatly improved, usually up to 107 Gauss/cm (for steel wool media), which is increased by 10 to 100 times, which provides a strong magnetic force for magnetic particles to overcome fluid resistance and Gravity, the fine-grained weak magnetic ore particles can be effectively recovered (the lower limit of the recovery fraction can be as low as 1 micron), the space occupied by the medium is greatly reduced, and the filling rate of the medium of the high gradient magnetic separator is only 5% to 12%. (Generally, the medium filling rate of the strong magnetic separator is 50% to 70%), thereby improving the utilization rate of the sorting area, the medium is light, the transmission load is light, and the processing amount is large. Because of these characteristics of the high gradient magnetic separator it has been used for separation of weakly magnetic minerals, non-metallic minerals iron and water treatment.

It  is full range of Valve Spindle for the following type :

AAA) YANMAR DIESEL ENGINE     
K(D)L, KFL-T, 6MAL-H/T/HT/DT, S165-T/ST/EN,     
S185-ST/UT/ET, M200L-UN/SN/EN/M220L-UN/SN/EN / N 330 

     
BBB) DAIHATSU DIESEL ENGINE     
PS22/26/ DS18(A)/ DS(B)22/

DL20/22/28/ DK20   / DK 28 
     
CCC) NIIGATA DIESEL ENGINE     
 6L(M)25BX/6M28AFTE/BX/6M31X/EZ/EX/  31AFTE  /34AGT   
     
DDD) AKASAKA      
AH30/AH38/ AH40/D/F/  A31/34/37/41/ DM28/30/33/36/38/40(A)K/ DM46/  UEC37H-HB/ UEC 37/88H     
UEC 37LA/ UEC45LA/ UEC52LA/ UEC52HA/ UEC60HA/  UEC60LS/ UEC45HA/115 ALL UET TYPE     
     
EEE) MITSUBISHI    (KOBE AND AKASAKA ) 
45/75C/ 45/80D/ 52/90D/ 52/105D.E/

UEC37H-IIB/ UET37/88HA/UEC45HA.LA/ UEC52HA.LA/ S6B/      
ETC     
     
FFF) HANSHIN     
6LU(D)26/ 6LU(N)28A/ 6LU(D)32/6LU(D)35/ 6LU(S)38/ 40 / 6LU40/ 6LU46A/ 6LU50A/

6EL30/ EL(S)32     /6EL(S)35/ 6EL38/ 6EL40/ 6EL(S)44/50A/     

GGG) MAN B&W     
S35MC/L35MCE/L50MCE/ L60MCE/ 40/54A     
     
HHH) MITSUBISHI PURIFIER     
SJ700~SJ1800/SJ 2000


III)SULZER 

 RND 68 RND 76 RD 44



JJJ) MAKITA

GSLH – 633 637                 KSLH -633 637



Kkk) PIELSTICK

PC 2-5  PC 2-6


Valve Spindle

Valve Spindle,Spindle Butterfly Valve,Marine Valve Spindle,Valve Extension Spindle

ZhouShan HeCheng Machinery Co., LTD. , http://www.hcmarineparts.com