In recent years, BMW's localization strategy in China has been continuously expanded and strengthened. According to the plan, the annual production capacity of BMW Brilliance and Dadong Plant will be increased from 300,000 to 400,000 units. The expansion project of Dadong Plant is basically completed. Netcom has learned from BMW Brilliance official that the BMW Brilliance New Dadong Plant will be officially put into operation on May 18, when the new BMW 5 Series long wheelbase will also be rolled off the line. After the new plant is put into production, the production capacity will increase from the current 160,000 units/year to 200,000 units/year, further satisfying the expanding demand for the BMW 5 Series.

In 2014, BMW Brilliance released a plan to upgrade and upgrade the Dadong plant. The entire project will invest over 350 million people. The new plant will be officially put into operation on May 18 this year. The new plant will continue to be commissioned with the new BMW 5 Series long-axis version, and the total production capacity will increase from the previous 160,000 units/year to 200,000 units/year.
Capacity layout, BMW in China, BMW Dadong factory, replacement 5 series In this year's Shanghai Auto Show, the new generation BMW 5 Series long-axis version of the model officially unveiled, the new car on the basis of the overseas version of the model has been significantly lengthened, long and wide body The dimensions are 5087*1868*1500 mm, and the wheelbase is 3108 mm, which is 133 mm longer than the standard version.

The appearance of the new generation BMW 5 Series long-axis version is basically the same as that of the standard-axis model, and the family-style design is like a “small 7 series”. The front face of the new car uses an "open eye" shape, and the interior incorporates a new LED daytime running light. The integrated through air intake further highlights the sportiness of the new car. The tail is equipped with full LED taillights, and it is expected to use a bilateral double-out exhaust layout to enhance the overall sportiness.

The interior of the new car has been fully upgraded, the size of the central control display has been increased and suspended, and the steering wheel has been completely new. A wheelbase of 3,108 mm is achieved, which gives the rear legroom a good performance. The rear seats are thick enough to increase the comfort of the rear passengers.

In terms of power, the new BMW 5 Series is equipped with a new B-series engine. The 2.0T engine is available in different versions of high and low power. The low power version has a maximum power of 135 kW and the high power version has 185 kW. The peak torque is 270 Nm and 350 Nm. The 3.0T engine has a maximum power of 239 kW and a peak torque of 450 Nm. The transmission part will be uniformly matched to the 8-speed automatic manual transmission. After the new car is released on May 18, it is expected to be listed on the domestic market on June 28.

Higher quality and Lower Price Export Standard Tee Produced by Jimeng Group.