1. Compression garbage trucks used in China will have a large degree of presence when they are carrying out operations. The phenomenon of disturbing people and so on occurs when the noise is relatively large. When the vehicle is designed and manufactured, it should be careful to choose the power take-off device, the engine and the chassis of the vehicle. Use measures to increase the smoothness of the system movement, to reduce the working noise better, and to use materials capable of absorbing noise to carry out the structure. In terms of design, it should be able to reduce the vibration. Through the further optimization of the loading mechanism and the hydraulic system, the quality of the assembly and the precision of the machining are greatly improved, so that the purpose of reducing the noise reduction of the compact garbage truck when working can be achieved. 2. There is no such high level of consciousness in the domestic waste garbage classification as in foreign countries. Usually, domestic garbage is mixed with solids and liquids. There is no garbage leakage in order to achieve better transportation garbage. , Drip, can refer to the following method to solve. 1. Install an edge baffle between the loader and the stuffer flip bucket, which can prevent the leakage of garbage. 2. The floor of the carriage should have a certain slope to prevent leakage of landfill leachate. 3. Install a sump tank in the underside of the obturator, which will be used for dripping of sewage between the obturator and the storage compartment. 4. Better sealing of the joints between the filler and the car body to prevent leachate and rubbish from leaking and dripping during the compression process. 5. The self-quality of the compressed garbage truck can be reduced, and the load utilization rate of the vehicle can be increased, and the operating cost of the vehicle can be reduced. Because the structure of the compression type garbage truck is more complicated, its own quality is also relatively large. Therefore, when the vehicle is designed, the chassis should be prioritized to choose the higher technical content, lighter self-quality, and good dynamic performance. , And cost-effective domestic chassis. The use of high-strength materials can reduce the self-quality of the vehicle. For accessories such as cover plates, trims, fenders, and the like, injection molded parts with relatively low density can be used, parts with higher integration degree can be used, and the space occupied area and the space can be better reduced. Quality, and will also help improve the working performance of the hydraulic system. (Text / Sun Ni) Palm Lift Transporter(crawler) Wolf Palm Lift Transporter,Palm Lift Transporter,Palm Tractor Crawler,Palm Transfer Vehicle Crawler FUZHOU RICHLUX TRADING CO.,LTD , https://www.richautoparts.com
 