In sorting arsenic-containing non-ferrous metals and precious metal ores process, it is discharged to the tailings slurry discarded tailings are contaminated arsenic. This is because in the process of sorting the ore, and leaching arsenic is arsenic from arsenic in the tailings, into the mineral (e.g., scorodite, arsenic, pyrite, etc.) - the results of step by washing. In order to prevent arsenic-containing sewage and its infiltrating polluted water system, it is necessary to reduce the arsenic content in the slurry discharged into the tailings by using a stable sediment which converts arsenic into easy-to-preserve and a method of arsenic removal from the slurry. Emission standards. The arsenic removal process for tailings slurry developed by the National Institute of Nonferrous Metals of the Soviet Union is based on the method of precipitating arsenic from solution using iron monosulfide. This - process is characterized by using a single iron sulfide with a mixture of ferrous sulfate. The amount of ferrous sulfate added must be such that the pH of the tailings slurry is reduced to 6.7~7.2 . Far multi-metal joint company - holder of mineral scheelite processing plant using this - Arts and several other ore deposits were tested. In all cases, the concentration of arsenic is reduced by the purification to a specified discharge standard (ie less than 0.05 mg / l). The sulphide - sulphate process from the tailings slurry of the concentrator is: preparing iron sulphate and sodium sulphide solution, using ferrous sulphate and iron monosulfide formed during the mixing of sodium sulphide and ferrous sulphate solution. The mixture is used to treat the slurry, allowing the slurry to settle in the tailings and returning the clarified water from the slurry (see figure). Treatment with the above method still does not guarantee that the slurry is well clarified in the tailings field. Therefore, in the process flow, the use of aluminum sulfate as a coagulant to supplement the slurry is also specified. To determine the quality of the purification of the concentrator during production, pulp and the purification of the end point had sewage days per + - sampling and analysis times. It can be seen from Table 1 that the content of arsenic in the liquid phase of the tailings slurry reaches the sanitary standard. Note: Pharmacy consumption: kg / ton ore: 5.4 ~ 7.1 ferric sulfate ; aluminum sulfate 2.9 ~ 4.3 ; sodium sulfide 1.4 .
Plano-convex cylindrical lenses are useful for line imaging or uni-axial magnification in a wide range of applications.Plano-Convex Cylindrical Lenses. Used to condense light in one dimension only. Positive cylindrical lenses can focus input collimated light to a line, transform a point of light to a line image or change the aspect ratio of an image. Useful for laser line focusing, laser projection, anamorphic beam shaping.
Plano Convex Cylindrical Lens,Plano Convex Cylindrical Rod Lens,Optical Plano Convex Cylindrical Lens,Glass Plano Convex Cylindrical Lens Changchun Ruiqi Optoelectronics Co.,Ltd , http://www.ruiqi-optics.com
