Holdwell replacement Deutz-fahr Automobile Engine Parts supply in a very wide range Engine Parts,refer to Deutz-Fahr F22 (1938)/T22 (1940)/HG25 (1942)/D28U (1948)/D30W – D22 – D15 (1949)/D15H (1950)/D30L – D25H – D22P – D22PH (1951)/D55L – D12 – D60L – D45L – D12H (1952)/D25N – D25NH – D12N – D12NH and more other engine, products includes fuel shut off solenoid,oil pump,PISTON ASSY,timing belt,bearing,gasket kit,VALVE SEAT and so on,Holdwell supply you reliable quallity replacement Deutz-fahr Automobile Engine Parts Engine Parts For Deutz-Fahr,Automobile Engine Parts,Deutz-Fahr Engine Parts,Deutz-Fahr Auto Engine Parts Hangzhou Holdwell Mechanical&Electrical Co.,LTD , https://www.dieselpart.nl
Precision Salt Spray Chamber Installation Items
Precision salt spray test chamber is a commonly used test chamber product, with the advantages of aging resistance, corrosion resistance, easy cleaning, no leakage, etc. It is widely used in electric power, machinery, building materials, industrial and mining and other fields.
Precision salt spray test chambers are used for surface treatment of various materials (including coating, electroplating, inorganic and organic coatings, anodic treatment, anti-rust oil, etc.) to test the corrosion resistance of their products.
Precise Salt Spray Chamber Installation Items:
The precision salt spray test chamber is located about 50cm behind the wall behind the placement. Leave space on both sides for proper maintenance.
Before the machine's main power cable, please install a no-fuse switch or knife switch.
Evacuate the pipe can be 50 diameter PVC hard pipe along the extension to the outside, pay attention to the installation of the fog pipe, to be tilted straight down from the height of the nozzle.
When installing the precision salt spray test box, avoid direct sunlight to avoid affecting the test conditions.
The box is made of PVC plastic to prevent collisions. Do not use the temperature outside the scope of the test standard to avoid deformation due to overheating.
Over-temperature indicator: When the over-temperature lamp is on, the over-temperature of the laboratory is protected. Please check whether the temperature setting of the temperature meter is too high, or whether the temperature setting is too low, and after the re-setting, the over-temperature lamp stays on, Please inform Wuhan Shangchen Test Equipment Co., Ltd.
Low water level indicator: When the low water level light is on, the lack of water in the laboratory or saturator is protected and the power supply will be cut off. At this time, check whether the test chamber or saturator leaks.
End indicator: When this indicator is on, it means the end of the test.