The actual operation of the bag changing work carried out by the dust bag

<

The actual operation of the bag changing work carried out by the dust bag

During the bag changing process, most of the bags will be corroded, aged, stiffened, and shrunk due to excessive use time. In the process of manual bag changing, because the collected dust is too fine, the specific operator should wear a dust mask to protect, wear goggles and hood, and ensure that the dust removal bag is removed.

Dust bag change bag steps:

First, the single-section dust-removing skeleton generally has space for bag changing operations. First remove the dust-removing skeleton bag together, and remove the dust-removing cloth bag attached to the dust-removing frame with a knife or other tools. (Do not damage the dust rack during work)

Second, the multi-section dust-removing skeleton structure, the dust-removing skeleton can be cut at the joint to separate the dust-removing skeleton, and the dust-removing cloth bag is removed after moving to the open space.

Third, in the installation of the dust bag, it is necessary to ensure that the size of the dust bag is the same as the installation size. The imperfect processing of the bag filter is also a problem that the dust bag is easy to cause. After the dust bag is installed, the mouth of the dust bag is tightly sealed, and the hand is difficult to rotate.

4. The mouth of the dust-removing cloth bag is completely bounced, and there is no margin after installation.

5. The dust-removing bag with the clamp cap structure should be fastened to prevent falling or leaking.

Hand-Push Crack Sealing Machine

Asphalt Crack Filler Machine,Hand-Push Crack Sealing Machine,Hand-Push Road Crack Sealing Machine,Hand-Pushing Type Crack Sealing Machine

Shandong Storike Engineering Machinery Co., Ltd. , https://www.storikemachinery.com