Brown magnetic symbiotic ore dressing process:

Brief introduction of browning magnetic symbiotic ore dressing process:

1. The crushing process of the crushing process is the existing equipment of the customer. It is broken by a two-stage jaw crusher to obtain ore materials of less than 30 mm.

2. The screening process uses the jaw crusher to break the ore. The final crushed product accounts for the majority of the granular ore. The powder condition accounts for a certain proportion. After the sieve, it is divided into two grades: 0-8mm and 8-30mm. The screening equipment adopts a circular vibrating screen with simple structure and convenient operation. It has the characteristics of energy saving, high efficiency and high screening efficiency, and is an ideal choice for ore screening.

3. Sorting process The sorting process in this process is divided into two parts. The first part is the magnetic sorting part and the second part is the gravity sorting part. Magnetic separation for recovery of mainly brown Ore higher magnetic permeability magnetic iron ore part, mainly for gravity separation process brown Ore lower magnetic permeability limonite fraction.

1. Magnetic separation magnetic separation is carried out by magnetic pulley and dry magnetic separator. Magnetic pulley is used to process coarse ore. Dry magnetic separator is used to treat fine granular ore, magnetic pulley and dry magnetic separation. After the machine is sorted, qualified magnetite concentrate can be obtained. Directly transported to the magnetite concentrate field via a conveyor.

2. Gravity sorting Gravity sorting is carried out by AM30 large particle jig and 2LTC-6109/8T trapezoidal jig. AM30 jig is used to process coarse-grained weak magnetic iron ore of 8-30mm size, 2LTC- The 6108/8T jig is used to process fine-grained weak magnetic iron ore of 0-8mm size. The jig has strict requirements on the size of the selected materials. Therefore, it is strictly selected according to the jig after screening. The sorting of the grain size is of great significance to the dressing index of the jig. According to the processing capacity of 50 tons per hour, two AM30 jigs can be combined with one 2LTC-6109/8T jig to meet the requirements.

4. The dehydration process jig sorting process requires water. Therefore, the concentrate and tailings produced by the jig contain more water, which may affect the transportation of concentrate and tailings. Therefore, our factory specially designed This dewatering process is used to remove excess water from the jig concentrate and tailings, reduce the moisture in the minerals, and return excess water to the water cycle, which can save water and reduce the cost of dressing.

5. Conveying process The concentrate and tailings produced by magnetic separation have no excessive moisture, and can be directly transported to the concentrate and tailings by a simple belt conveyor. The concentrate and tailings produced by the jig are more Moisture, but it can also be transported by belt conveyor after dewatering by dewatering screen. Therefore, the whole transport process adopts a belt conveyor with simple structure and simple operation.

Kitchen Storage Items

We're own factory for professionally producing kitchen storage containers sets, such as tea and coffee jars, dry food storage containers, kitchen jars, kitchen storage boxes, tea coffee and sugar canisters, tea coffee sugar jars, kitchen storage containers stainless steel, cream tea coffee sugar canisters, food storage boxes, kitchen jar set, food storage jars, flour and sugar canisters, amazon kitchen containers, galvanized canisters etc.