SLA-Stereo Lithography Appearance technology, using photosensitive resin 3-D printing materials: milky white texture, good strength, but relatively small toughness, small and thin brittle fracture, but easy to grind, electroplating, painting and coloring. Photosensitive resin is composed of two parts, namely photoinitiator and resin (resin consists of prepolymer, diluent and a small amount of additives). The amount of photoinitiator and diluent has an important influence on the curing speed and quality of photosensitive resin. When the proportion of photoinitiator and diluent is appropriate, not only the curing speed is fast, but also the curing quality is good. Therefore, in order to select large brand manufacturers, mature and stable photosensitive resin 3D Printing materials are very important. In terms of performance, there are also some imported photosensitive resin materials with high strength, transparency, high temperature resistance, moisture resistance and waterproof functions. In addition, three-dimensional printing materials of composite ceramics, such as alumina (AI2O3) m zirconia (ZRO2), hydroxyapatite (HAP), tricalcium phosphate (TCP) and so on, which are similar to high-resolution ceramic powder and photosensitive resin, can be selected. Electric Power Tools,Rapid Prototype Plastic,Stereolithography 3D Printer,Customized Rapid Prototype Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com
The daily use of electrothermal membranes is a matter of concern. If we take extra precautions during daily use, the lifespan of electrothermal membranes should be much longer. Here are some suggestions from Xi'an Huayang Electric Heating to electric heating film users:
1. First of all, electric heating film heating should be set to a reasonable temperature.
2. The voltage required for electric heating film heating is 220V. It must be ensured that the power consumption can meet the electric power consumption of electric film heating and the safety of external power supply. (The voltage is low, the heating rate is reduced.) 3. Do not pierce or hit the surface of the electric heating film with the external force. 4. The surface temperature of the electric heating film should not be set more than 60 degrees. If the temperature is too high, you need to lower the setting temperature to prevent scalding.
5, electric film can not be soaked in water, such as ground water should be promptly cleaned, such as electric film is soaked in water, please immediately stop using, and contact a professional to detect.
6. No additional heating and heating equipment can be installed on the surface of the electric heating membrane heating equipment. If there are other additional conditions, technical personnel are required to install it.
7, in the laying of electric heating film heating equipment surface, not a large area of ​​laying insulation materials, such as: foam blankets, yoga mats, quilts, carpets more than 3 cm thick, etc., to ensure that the laying of electric heating film heating the ground has a good cooling environment.
8, no one for a long time, should turn off the heating film heating equipment.
When using, pay attention to the above points to warm the electric heating film can be better to use, you can better protect warm warm life.
Xi'an Huayang Electric Engineering Co., Ltd. is a high-tech enterprise that integrates the development, production, processing, design, construction and maintenance of electric film. Since its inception, the company has always adhered to the development strategy of “environmental heating for science and technology and creating quality projectsâ€. With a truly professional technical image, good service attitude and standardized construction management, it has provided you with a perfect heating system solution. Build a new generation of human settlements.
Choose Huayang electric heating and choose a comfortable life.
Electric film is warm but easy to use
Electric floor heating in foreign countries has been successfully applied for more than 50 years, and the domestic application of heating and cooling will be more than a decade. With the constant popularity of electric floor heating, it has slowly entered millions of households and has been accepted by more and more people.