German MuTec online average moisture meter calcium salt application

<

First, the application object

1.1 Products: Dry salt/tidal salt (white particle NaCl)

Second, the process data

2.1. Process Type: Belt Conveyor

2.2. Installation location: downstream of tide salt outlet

2.3. Product flow rate: 1.2~1.5t/h

2.4. Height of the product on the sensor: 3 to 12 cm (floating with salt level)

2.5. Moisture Measurement Range: 1.9% to 2.5% Display Range 0% to 20%

2.6. Material Temperature: 60°C to 120°C

2.7. Ambient temperature: 40°C to 60°C

2.8. Features: High density, hot air dryer outlet temperature 80 ~ 120 °C, the entire line of water vapor is larger.

Third, the calibration data

3.1 Calibration point 1: Number: 820891 Mass percentage: 0 %

3.2 Calibration point 2: 1# Number: 454091 Mass percentage: 2.20%

3.2 Calibration point 3: 2# Number: 485499 Mass percentage: 1.43%

3.3 Calibration Point 4: 3# Number: 476284 Mass Percentage: 2.66%

3.4 Calibration Point 5: 4# Number: 476284 Mass Percentage: 2.66%

3.5. Accuracy: ±0.02%

3.6. Display Range: 0~20% M

Fourth, sensor data:

4.1 Sensor Type: FMS400C

4.2 Sensor Surface Materials: Ceramics

4.3 Magnification: Factor 1

V. Use results:

5.1. 4-20mA Signal Purpose: Humidity Control

5.2. Initial state:

5.3. Costs and Benefits: Before Use: Low Product Moisture Content After Low Use: Effectively Control Water Content Increase Production Capacity

5.4. Quality benefits: Before use: Larger moisture content after use: Constant moisture content and compliance criteria

5.5. Remarks:

The on-line real-time detection of the moisture content of the tidal salt in the line, strictly controls the moisture content of the tidal salt after drying to between 2.5% and 3.0%, optimizes the automatic control system, improves the production efficiency, and thus achieves an effective cost saving. . Effective control of water content is beneficial to increase the production capacity of the production line. Will directly expand the production efficiency of enterprises.

Photoinitiators

Tpo Photoinitiator,White Powder 95235-30-6,Light Yellow Powder 75980-60-8,Pale Yellow Liquid 84434-11-7

Henan Tianfu Chemical Co.,Ltd , https://www.hnionicliquids.com